Liberty Hardware - Mission - Horizontal Bail and Backplate

Q&A

1. Q: what is width of plate,in inches?
   A: The width of the plate is 1 1/2" Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
2. Q: Can i order them 3 inch center to center?
   A: This particular handle is currently only offered in this one specific size.  Was this answer useful to you? Yes (0) No (1) Yes (0) No (1)
3. Q: The 1" screws are too long for my 3/4 thick drawers. I think a 3/4" screw would work better, but what diamter do I need?
   A: This specific item requires 8/32 screws. ¿¿¿¿¿¿¿ Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
4. Q: Does this SAM black match the MIB black of the single knob?
   A: The hardware items listed with a “MIB” code will not coordinate in finish.   Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
5. Q: How wide should a drawer be before we consider installing 2 drop pulls?
   A: Typically if the drawer is larger than 36" inches we would suggest placing two handles.  However, it is a matter of preference and function. We would suggest ordering samples to view in the comfort of your home.  Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
6. Q: are the fastening scres included with the pulls
   A: Please be advised  all of our cabinet hardware comes with the necessary screws for installation.  The manufacturer ships standard screws to fit the item purchased, 1" screws are packaged with most of our hardware to accommodate standard 3/4" door fronts. Was this answer useful to you? Yes (1) No (0) Yes (1) No (0)
7. Q: Do you have any square knobs for the doors that would be a good match for these pulls?
   A: This particular collection does not have coordinating square knobs.  They currently only offer the pendants.   Was this answer useful to you? Yes (1) No (0) Yes (1) No (0)
8. Q: ¿Could you confirm me the total length in cm? ¿7 inches? Thanks in advance
   A: The overall dimension is 12.3825 cm  Was this answer useful to you? Yes (1) No (0) Yes (1) No (0)
9. Q: How may screws are on these pulls?
   A: This particular pull requires two screws 4 1/4" ( 108mm ) apart.  Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
10. Q: does Model # PN8005-SAM-A come in different center widths?
    A: This specific item is currently only offered in one size.  Was this answer useful to you? Yes (1) No (0) Yes (1) No (0)
11. Q: What knobs would match these pulls?
    A: Please  click here  for the coordinating knob.  Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
12. Q: How far apart are the screws?
    A: The centers are  4 1/4" ( 108mm ).  Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
13. Q: What are these made of
    A: The following item listed is fabricated from " Zinc Die Cast" material. Was this answer useful to you? Yes (1) No (0) Yes (1) No (0)
14. Q: What are these made out of
    A: The following item listed is fabricated from " Zinc Die Cast" material. Was this answer useful to you? Yes (1) No (0) Yes (1) No (0)
15. Q: How does this attach to a door? Do you have a photo of the back?
    A: The following hardware item fastens from the back with two screws.  Was this answer useful to you? Yes (1) No (1) Yes (1) No (1)